Axxess ASWC Instalační manuál stáhnout pdf (Strana 6)

Section 1: Installation

Onceyouhavecollectedorprintedouttheinformationsheetonyour

particularvehiclefromtheAxxesswebsite(www.axxessinterface.com)

you’rereadytoinstalltheASWC-1.

Installing the ASWC-1

1) ConnecttheBlackwireoftheASWC-1toground.Youmayusethe

samegroundingpointastheaftermarketradio.

2) ConnecttheRedwireoftheASWC-1toa12-voltaccessorywire, 

onethatturns“On”and“Off”withtheignitionkey.

3) LocatethecorrectSWCwire(s)inthevehicle’sradioprimaryor

secondaryharnessasdescribedinthevehicleinformationsheet

foundontheAxxesswebsite.Connectthecorrectwirecolor(s)from

theASWC-1tothesteeringwheelcontrolwire(s)inthevehicle.

Note: Metra recommends that the wire(s) are soldered for the

best and most secure connection. T-Taps or scotch locks are not

recommended due to the higher chance of an intermitted connection

or change in resistive values.

1 2 3 4 5 6 7 8 9 10 11 ... 47 48

Žádné komentáře

Axxess ASWC Instalační manuál Strana 6