
1st led
flash is pin #2 (White/Green) on the
ASWC
2nd led flash is pin #3
(Orange/Green)
on the
ASWC
3rd led flash
is
pin #4 (Green/Orange) on the
ASWC
4th
led
flash is pin #5 (Gray/Red) on the
ASWC
5th led
flash is pin #8 (Black/Green) on the
ASWC
6th
led
flash is pin
#11
(Gray/Blue) on the
ASWC
7th
led
flash
is
pin
#1
(Pink) on the ASWC
If
during the auto detect sequence there was no
long led
flash, just short
ones, the
ASWC
was not connected to the correct wire
in
the
vehicle
or
the incorrect wire was used on the
ASWC.
Double check connections and
the vehicle information sheet to verify that you have the correct wires con-
nected.
The 2nd set
of
led flashes represents what brand radio the ASWC
believes
it is connected to. Each flash is for a different radio manufacturer .
. 1st
led flash is for Eclipse
2nd led flash is for Kenwood
: 3rd led flash is for
Clarion
4th
led
flash is for
Sony and Dual
5th led flash is for
JVC
6th led flash
is
for Pioneer and Jensen
7th led flash
is
for Alpine*
8th led flash is for Visteon
9th led flash is for Valor
1Oth
led flash is for Clarion 5V
* Note:
If
the
ASWC
flashes 7 times and you do not have an Alpine radio
, connected to it that means that the
ASWC
did not see any radio connected.
Verify the 3.5mm connector is connected to the SWC input on the radio.
Komentáře k této Příručce